Franklin Electric - Submersible - Products

Location: Water Systems Home > 4" Motors > 4" High Thrust

Dimensions are available on page 2

4" HIGH THRUST MOTORS

Single-phase
3 & 5 horsepower
230 volts - 60 Hz; 220 volt - 50 Hz

Three-phase
3 through 10 horsepower
200, 230, 380, 575 volts - 60 Hz; 220 volt - 50 Hz
460/380 volts - 60/50 Hz;

APPLICATION DATA
These motors are built for dependable operation in 4" diameter or larger water wells. Temperature and time rating continuous in 86 °F (30 °C) water at 1/4 ft/sec fl ow past motor. Rotation: singlephase, CCW facing shaft end; three-phase, electrically reversible.

For further information, refer to Franklin Electric's "Application Installation Maintenance Manual (AIM)" for submersible motors.

CONTROL BOXES Franklin's single-phase submersible control boxes are suitable for outdoor mounting with operation over temperature ranges of +14 °F to +122 °F. Start and run winding overloads protect the motor from failure due to abnormal operating conditions. Available in 3 and 5 hp ratings, the DELUXE Control Box incorporates a magnetic line contactor to eliminate the need for auxiliary contactors and heavy duty pressure switches. A heavy duty terminal strip with box type lugs makes it easy to install up to #2 AWG wire. Ground lugs provide a means of grounding the motor and Control Box to the power supply ground in compliance with NEC and other National and local codes.	BASIC FEATURES Corrosion-Resistant Construction Stainless Steel Splined Shaft Hermetically-Sealed Windings Anti-Track Self-Healing Resin System Water Lubrication Filter Check Valve (Water Well) Kingsbury-Type Thrust Bearing Pressure Equalizing Diaphragm Sand Fighter Slinger Built-In Lightning Arrestors (single phase) Removable "Water-Bloc" lead installed in 60 Hz and dual frequency rated water well motors. Consult factory for additional leads. NEMA Mounting Dimensions UL 778 Recognized (North American Voltages) CSA C22.2 #108 Certified

SPECIAL FEATURES 316 Stainless Steel: Special construction option for acid, low pH, and seawater applications. Oil Stripper: Special construction option for secondary oil recovery wells, geothermal, or other applications with high ambient temperatures. Consult Factory for construction details. World Wide Adaptability: All standard voltage and hertz ratings are offered. Contact Franklin Electric for availability.
Dimensions are available on page 2

"Left click" to VIEW pdf.

To SAVE pdf "Right Click" & choose

Copyright 1998-2007. Please review our Terms of Use before accessing this site.
Franklin Electric Co., Inc. 400 E. Spring St., Bluffton, IN, 46714, U.S.A.
Contact Us Tel: 260.824.2900 Fax: 260.824.2909