Three-phase
1/2 through 2 Hp - 3-wire
200, 230, 380, 460, 575 volt - 60 Hz; 220, 380 volt - 50 Hz

APPLICATION DATA
These motors are built for dependable operation in 4" diameter or larger environmental wells. Temperature and time rating continuous in 86°F (30°C) water.

Rotation: Single-phase are CCW facing shaft end. Three-phase are electrically reversible.

These motors have the same electrical characteristics as the standard 2-wire, 3-wire, and three-phase Super Stainless motors.

For further information, refer to Franklin Electric's "Application Installation Maintenance Manual (AIM)" for submersible motors.

• Corrosion-Resistant All Stainless Steel Exterior Construction
• Stainless Steel Splined Shaft
• Hermetically-Sealed Windings
• Anti-Track Self Healing Resin System
• Water Lubrication
• Filter Check Valve
• Kingsbury-Type Thrust Bearing
• Pressure Equalizing Diaphragm
• Built-In Lightning Arrestors (all single-phase; 200 and 230 volt three-phase)
• Removable Water-Bloc™ Lead Connector (sold separately)
• U.L. 778 Recognized
• CSA C22.2 #108 Certified
• NEMA Mounting Dimensions

• Pollution Recovery motors are equipped for use in monitoring and recovery wells in which hydrocarbons and other chemicals may be present.
• Special Viton® rubber parts and other construction materials used in this motor are defined on the reverse side.
• Special Pollution Recovery grounded lead assemblies are sold separately. See reverse side for available lengths.
• No flow inducer sleeve required in water up to 86°F (30°C).
• Two-wire motors are split phase designs with integral starting components and do not require a control box. They feature FRANKLIN'S patented 2-wire BIAC starting switch which provides automatic torque reversal to aid starting in adverse environments and prevents extreme fast cycling (e.g. due to water logged tank).
• Three-wire motors use FRANKLIN'S exclusive 3-wire QD (QuickDisconnect) control box with the patented QD Relay. This relay provides the ultimate in operational life.
• #316 Stainless Steel: special construction option for acid, low pH and seawater application

- Viton is a registered trademark of DuPont Dow Elastomers.