Three-phase
200, 230, 380, 460, 575 volt-60 Hz; 220, 380 volt-50 Hz

These motors are built for dependable operation in 4" diameter or larger water wells. Continuous rating in 86°F (30°C) water. Rotation: Single phase, CCW facing shaft end; three phase electrically reversible.

For further information, refer to Franklin Electric's "Submersible Motors: Application, Installation, Maintenance Manual."

• Corrosion-Resistant All Stainless Steel Exterior Construction
• Stainless Steel Splined Shaft
• Hermetically-Sealed Windings
• Anti-Track Self-Healing Resin System
• Water Lubrication
• Filter Check Valve
• Kingsbury-Type Thrust Bearing
• Pressure Equalizing Diaphragm
• Built-In Lightning Arrestors (all single-phase; 200 and 230 volt three-phase)
• Removable "Water-Bloc" Lead Installed In North American 60 Hz Water Well Motors. Consult Factory For Additional Leads.
• UL 778 Recognized (North American Voltages)
• CSA Certified
• ANSI/NSF 61 Certified
• NEMA Mounting Dimensions

• No flow inducer sleeve required in water up to 86°F (30°C) for motors through 2 Hp. 1/4 ft./sec. cooling flow required for 3 Hp motors.
• Two-wire motors are split-phase designs with integral starting components and on-winding thermal overload protection, so they do not require a control box. They feature FRANKLIN'S patented 2-wire BIAC starting switch which provides automatic torque reversal to aid starting in adverse environments.
• Three-wire 60 Hz motors 1/3 - 1 Hp use FRANKLIN'S exclusive 3-wire QD (Quick-Disconnect) Control Box with the patented QD Relay. This relay provides the ultimate in operational life.