| BASIC FEATURES |
| • |
Corrosion-Resistant Construction |
| • |
Stainless Steel Splined Shaft |
| • |
Hermetically-Sealed Windings |
| • |
Anti-Track Self-Healing Resin System |
| • |
Water Lubricated Bearings |
| • |
Filter Check Valve |
| • |
Kingsbury-type Thrust Bearing Rated
for 1500 lbs. Downthrust |
| • |
Pressure Equalizing Diaphragm |
| • |
Removable "Water-Bloc™ Lead System" |
| • |
NEMA Pump Mounting Dimensions |
| • |
UL 778 Recognized |
| • |
CSA C22.2 #108 Certified |
|
|
| Three-phase |
|
3 through 10 horsepower
200, 230, 380, 575 volts - 60 Hertz
460/380 volts - 60/50 Hertz |
APPLICATION DATA
These motors are built for superior dependability in
4" diameter or larger coalbed methane wells. Temperature
and time rating continuous in 86°F (30°C) water
at 1/4 ft. per second flow past motor. Rotation: electrically
reversible.
For further information, refer to Franklin Electric's
"Application
Installation Maintenance Manual (AIM)" for submersible
motors.
| COALBED METHANE MOTOR
FEATURES |
| • |
Exclusive Sand Fighter™ Sealing
System |
| • |
Reinforced Diaphragm Housing Resists
Damage from Bottom Tagging |
| • |
Protective Filter Shields Diaphragm
from Debris |
| WARNING: Serious
or fatal electrical shock or fire hazard may result
from failure to follow the instructions for proper
installation and use which accompany this equipment.
Do not use motor in swimming areas. |
|
